Drivers Wm320 Wireless Data Device Port Devices



For more info about the Surface MSI naming convention, see Deploy the latest firmware and drivers for Surface devices. If there's not an.msi file that corresponds to the build of Windows 10 you have installed, select the.msi file that's closest to (but still lower than) your build number. Ethernet-to-Wireless Bridging. With a separate Ethernet port, WiPort offers the unique ability to transparently bridge existing Ethernet-ready devices to a wireless network. Scan, Gather and Report Radio Parameters. With its Scan command, WiPort enables the ability to report MAC address, RSSI and SSID which are extremely useful during site. The mission of a wireless USB hub 3.0 is to transform data that is received from attached USB devices into Wi-Fi signals which are then redirected to other users of the Wi-Fi network. The peripherals that need to be used remotely should be directly plugged into the hub’s USB ports in order to be shared across the local network. Anyone who connects to your network via cable or wireless could then easily search for shared folders and copy that data to their computer. When looking at open ports for a computer or device, you can easily see whether remote desktop is enabled, whether an FTP or HTTP server is running and whether file sharing is enabled or not.

This article describes an issue that occurs when you use a FireWire port-based device in Windows 8.1 or Windows 8. Additional steps of configuration is required to enable this update after the installation.

Symptoms

Assume that you have a computer that equips with an IEEE 1394 FireWire controller card. After you upgrade the computer from Windows 7 to Windows 8.1 or Windows 8, devices that connect to the computer by using a FireWire port do not work.

Cause

This issue occurs because the legacy 1394 bus drivers (1394bus.sys and Ochi1394.sys) are removed in Windows 8.1 or Windows 8.

Resolution

Update information

How to obtain this update

Microsoft Download Center

The following files are available for download from the Microsoft Download Center:

Operating system

Update

All supported x86-based versions of Windows 8.1 or of Windows 8

All supported x64-based versions of Windows 8.1 or of Windows 8

For more information about how to download Microsoft support files, click the following article number to view the article in the Microsoft Knowledge Base:

119591 How to obtain Microsoft support files from online services Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help prevent any unauthorized changes to the file.

Additional steps of configuration requirement

After you install the 1394 OHCI Legacy Driver.msi file, follow these steps:

  1. Right-click the Legacy1394.inf file under one of the following paths based on the computer's architecture:

    • C:Program Files1394 OHCI Compliant Host Controller (Legacy)x86_driver

    • C:Program Files1394 OHCI Compliant Host Controller (Legacy)x64_driver

  2. Click Install.

  3. Open Device Manager in Control Panel.

  4. Expand IEEE 1394 Bus host controllers, and then locate the host controller.

  5. Right-click the host controller, and then click Update Driver Software.
    The screen shot of the host controller and the Update Driver Software is listed in the following example:

  6. Click Browse my computer for driver software.

  7. Click Let me pick from a list of device drivers on my computer.

  8. Click Generic1394 OHCI compliant host controller (Legacy), and then click the Next button.

  9. Click the Close button.


Prerequisites

There are no prerequisites for installing this update.

Registry information

To apply this update, you do not have to make any changes to the registry.

Restart requirement

You have to restart the computer after you apply this update.

Update replacement information

This update does not replace a previously released update.

File information

The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.

Windows 8.1 and Windows 8 file information notesThe MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are not listed

For all supported x86-based versions of Windows 8.1 or of Windows 8

File name

File version

File size

Date

Time

Platform

1394_ohci_legacydriver.msi

Not Applicable

208,896

15-Aug-2014

20:48

Not Applicable

For all supported x86-based versions of Windows 8.1 or of Windows 8

File name

File version

File size

Date

Time

Platform

1394_ohci_legacydriver.msi

Not Applicable

208,896

15-Aug-2014

20:48

Not Applicable


Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the 'Applies to' section.

More Information

Device

Steps of uninstalling the 1394 OHCI Legacy Driver.msi file

  1. Open Control Panel in the Category view.

  2. Click Uninstall a program in Control Panel.

  3. Right-click 1394 OHCI Compliant Host Controller (Legacy), and then click Uninstall.
    The screen shot of uninstalling the 1394 OHCI Compliant Host Controller (Legacy) is listed in the following example:

Additional package information

Drivers Wm320 Wireless Data Device Port Devices Adapter

  • This driver is only intended to work with legacy 1394 host controllers. Therefore, you may experience lower transfer data rates than the 1394b driver.

  • The driver is intended to resolve compatibility issues for 1394 peripherals on 1394b systems. If you are not experiencing these issues, you should continue to use inbox drivers that are provided in Windows 8.1 or Windows 8.

  • You have to reinstall this stand-alone driver package if you upgrade to a newer operating system version in the future.

Drivers wm320 wireless data device port devices compatible

Drivers Wm320 Wireless Data Device Port Devices Compatible


For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:

Drivers Wm320 Wireless Data Device Port Devices Gigabit

824684 Description of the standard terminology that is used to describe Microsoft software updates

USBtoWIFI Bi-Directional

USBTOWIFI BI-DIRECTIONAL Read and Write File Sharing from a remote wireless shared folder. Compatible with most any device that can read and write to a USB stick. File Transfer over USB and WIFI is easy! The USB to WIFI stick is your solution to sharing files over your network. This is an ideal solution for equipment that is not currently equipped with a wireless option. The USB to Wifi device does not require any drivers! The device works standalone and…

Looking for Distributors

USB to WIFI – Looking for Distributors We are currently looking for worldwide distributors for the USB to WIFI device. Ideal for industries such as CNC, metal working machines, 3D printers, printing, embroidery machines, kniting machines, small and large large factories, etc. Developers! Add Wireless Transfer to your software! We are looking for worldwide distributors who can commit to 25-200+ purchases a month. If this applies to you, please contact us. Distributors are limited based on location and industry.

Drivers Wm320 Wireless Data Device Port Devices Download

File Transfer over USB and WIFI

File Transfer over USB and WIFI NOW you can have the ability of transferring files over your wireless network. With the USB to WIFI device, you can transfer files from your PC to a device with USB, over your wireless network. Have the ability to share your files with many devices all at the same time! NO more need to pass around USB sticks in your factory or work area. Your device doesn’t have USB but it has floppy? Check…

Tajima Graphical Display Wireless Transfer

Tajima Graphical Display Wireless Transfer Wireless upgrade solution for TFMX, TFGN, TMAR Works on machines that cannot be upgraded to USB from Floppy. Also works on all other Tajima machines with USB or with the Floppy to USB upgrade such as TME-DC, TME-HC, TMFX, TFHX, etc.
Drivers Wm320 Wireless Data Device Port Devices

Wireless Flash Stick – Transfer Files over WIFI

Wireless Flash Stick Transfer Files over WIFI – Wireless Flash Stick The USBtoWIFI device is a Wireless Flash Stick. It works just like your average USB Data Stick. However, the USB to WIFI device is WIRELESS! The USB to WIFI device reads files from a remote location and share those thru the USB port. This is an idea solution for devices with a USB port but that do not have a wireless solution.