6, port 2 connects to port 3, and port 4 connects to port 5. The Method Editor application identifies the valve’s two positions as “1–2” (port 1 to 2) and “1–6” (port 1 to 6). Thermo Scientific TSQ Altis. Provide an INF file that specifies the Ports device setup class and the Serial function driver as the service for the port. To configure a serial port as COM port, comply with the requirements that are defined in Configuration of COM Ports. IEC 60870-5 Suite TOP Server - Unlimited Device License: Thermo Westronics Serial+Ethernet TOP Server: IEC 61850 MMS Client Driver TOP Server - 10 Device License: TIWAY TOP Server: IEC 61850 MMS Client TOP Server - Unlimited Device License: Torque Tool Ethernet Driver: Intelligent Actuator SuperSEL TOP Server: Toshiba PLCs Serial & Ethernet Suite. LC Driver Package 14. All other trademarks are property of Thermo Fisher Scientific Inc. And its subsidiaries. Chromeleon 7 Installation Guide Page 1: 1 About the Documentation. For license device: 1 port For connecting Dionex modules: 1 or more additional port.

• Thermo Scientific Port Devices Driver Downloads
• Thermo Scientific Port Devices Driver Download
• Thermo Scientific Port Devices Driver Download Windows 7
• Thermo Scientific Port Devices Driver Download Windows 10
• Thermo Scientific Port Devices Driver Download 64-bit

Home >Software > RheoWin 4.30.00xx

Download the RheoWin files

This is a fully executableversion of RheoWin 4. Please note that in order to be able to install RheoWin 4 on your computer you need a RheoWin 4 License Key !

Download the following *.ZIP file and copy them to a single (temporary) directory on your hard drive.

• Download file (File: rhw430030_complete.zip, 87 Mbyte, from July 31 2013).
• RheoWin information file (File: rhw430030_readme.doc, 164 kbyte)
• RheoWin what's new file (File: rhw430030_new, 44 kbyte)

Then unzip the *.ZIP file using any suitable unzip program.

In case you do not have an (UN)ZIP program you can download a freeware ZIP program from the following Web-site : http://www.ozemail.com.au/~nulifetv/freezip/index.html.

Thermo Scientific Port Devices Driver Downloads

Updates

There are no updates available for this version.

RheoWin 4 and Windows 7 and Windows 8

RheoWin 4 is compatible with Windows 7 and Windows Vista (both the 32 bit and 64 bit versions).
RheoWin 4 is also compatible with Windows 8 (until now we have only tested the 32-bit version).

Please note: Currently the driver for the Foculus camera, which is used with the RheoScope module is NOT compatible with Windows Vista 64 bit, Windows 7 64 bit and Windows 8 64 bit.

Virtual com port driver for Viscotester D and Viscotester E

The virtual com port driver for the Viscotester D and Viscotester E is available for download here.

Virtual com port driver for SC and AC circulators

The virtual com port driver for the new SC and AC circulators is available for download here.

Update for Foculus camera (RheoScope module)

In case you do not get an image from the FOculus camera which comes with the RheoScope module in RheoWin, please download and install the newest driver for this camera from the camera manufacturers web-site using the link below.
Due to a Windows Update (from Microsoft) the Direct X support of the camera driver didn’t work anymore. This was fixed by the manufacturer with a new driver version.

• Download driver (File: FOcontrol_Install_4.0.5.1.zip, 7.6 Mb).

Please note: Currently the driver for the FOculus camera is NOT compatible with Windows Vista 64 bit and Windows 7 64 bit. The camera manufacturer is working on a solution for this.

Supported instruments

• RheoWin 4 currently supports the following HAAKE instruments:

  Rheometers	Viscometers	Circulators	Temp.Controllers
  MARS II	VT550	DC5	TC80
  MARS III
  RheoStress 6000	F6, N6	TC81
  RheoStress 3000	RotoVisco 1	F8, N8	TC500
  RheoStress 600	DC30, DC50	TC501
  RheoStress 300	VT6L, VT6R, VT7L, VT7R	F3C	TP1800
  RS150	VT7L-plus, VT7R-plus	Phoenix	UTC
  RS80	CTC (Oven)
  RS75	VT D, VT E	Dynamax
  RT20	MTMC (MARS III)
  RheoStress 1 *	SC150, ACxxx, PCxxx**	UTMC
  RheoScope 1	ACCEL**

• * RheoWin 4 currently does not support the first series of RheoStress 1 instruments, for these instrument only RheoWin 3.x upto version 3.5x can be used.
  The first series of RheoStress 1 instrument can be recognized by the silver coloured drive motor shaft.
  The second series of RheoStress 1 instrument have a dark coloured drive motor shaft.
• ** A firmware update may be needed for these devices to be compatible with RheoWin, see here.
• RheoWin 4 does not support older instruments like the RT10, VT500, VT501 and the RV20+RC20/RV30 with CV20, CV100, M5 or M10. For these instruments please use RheoWin 2.97.
• RheoWin 4 also does not support the RS100 1 Ncm, the RS100 5 Ncm und the RS50.
  For these instruments please use RheoWin 3.61.

Supported operating systems

Thermo Scientific Port Devices Driver Download

• We recommend the use of one of the following Microsoft Windows operating systems:
  - Windows 8 (we have only tested 32-bit until now).
  - Windows 7 (both the 32-bit and the 64-bit version).
  - Windows Vista with or without any Service Pack.
  - Windows XP with or without any Service Pack.
  - Windows 2000 with Service Pack 1 (or higher)
  
• RheoWin also runs under one of the following Microsoft Windows operating systems, however please note that Microsoft does not supply support for these operating systems anymore!
  - Windows NT4.0 with Service Pack 6 and Internet Explorer 6
  
• RheoWin will not run under the following Microsoft Windows operating systems (or any other operating system)
  - Windows ME
  - Windows 98 SE
  - Windows 98 with Y2K update and Internet Explorer 4.01 SP2
  - Windows 95
  - Windows 3.x
  - Windows NT3.x !
  
• IMPORTANT: In order to be able to make RheoWin compliant with the FDA 21 CFR part 11 it is required that RheoWin runs under Windows7, Windows Vista, Windows XP or Windows 2000 (or Windows NT 4.0 with the above mentioned restrictions).
  
• We highly recommends the use of a PC with a Pentium IV (or faster) processor and at least 512 Mb of RAM.

Rheowin 4 license key

In order to be able to install this version of RheoWin on your computer you will need a RheoWin 4 License Key. A Key-Diskette for RheoWin 2.xx or a RheoWin 3 License Key will NOT enable you to install RheoWin 4.

The keys for RheoWin 4 consist of a company name, serial number and the key code. You will have to enter this information manually during the installation. When you receive the key per e-mail this information will be stored in a *.key or *.txt file which can be opened and viewed by using any text-editor (Notepad, Write, Word, etc.)

A separate license key is needed for installing the tools for FDA 21 CFR part 11 compliance. A separate license key is also needed to install the TTS (Time Temperature Superposition) tool, the Spectra calculation tool and the MWD tool.

License Keys for RheoWin 4 are available on request only !

In order to request a RheoWin 4 license key download the RheoWin Key order form fill it out as completely as possibly, save it and send it to support.mc.de[at]thermofisher.com (replace [at] by @). You will then receive your new key per e-mail.

Installation of RheoWin 4

RheoWin 4 can be installed parallel to an existing RheoWin 2.xx installation and/or an existing RheoWin 3.xx installation if needed. Please note that RheoWin 4 can read RheoWin 2.xx and RheoWin 3.xx data, job and page files (backward compatibility), but that RheoWin 2.xx can NOT read RheoWin 3 files and that RheoWin 3.xx can NOT read RheoWin 4 files!!
RheoWin 4 should never be installed in the same directory as RheoWin 2.xx or RheoWin 3.xx!!

The installation program of RheoWin 4 offers the user the possibility to transfer all settings (apart from the Unit settings) from a previous installation of RheoWin 3.xx.

Here's how to install RheoWin:

1. Please note that (Windows) Administrator rights are needed to install RheoWin!
   
2. From a directory on your harddisk in which you unzipped the *.ZIP files:
   To install RheoWin from harddisk go to the (temporary) directory in which you unzipped the *.ZIP files after downloading. Please make sure that you have the following 7 files in that directory : HAAKE RheoWin.msi, Setup.exe, Data1.cab, 1031.mst, 1033.mst, 1034.mst, 1036.mst, 1043.mst. To start the installation please run the Setup.exe program.
   
3. From the RheoWin CD:
   This CD is 'self-starting', just click on 'Install HAAKE RheoWin 4' to start the installation. In case the installation screen does not come up automatically you can start it by double-clicking on the file 'index.htm' in the Windows explorer, this will show the installation screen in your web-browser. You can also start the installation by run the setup.exe program from the RheoWin directory on the CD

The installation program will guide you through the installation. Please make sure that you have a RheoWin 4 License Key (see above) readily available since the installation program will ask for this.

RheoWin and Windows users (Administrators, PowerUsers, Users, etc.)

Windows users with the default Administratoror PowerUser rights will be able to run RheoWin without the need for any modifications.

For Windows users with the default Users rights an Administrator has to make sure that those users have read access to the RheoWin 4 main directory (by default c:Program FilesThermoRheoWin) and all its subdirectories, as well as read and write (!) access to the
HKEY_USERS.DEFAULTSoftwareThermoRheoWin
key in the windows registry and the following two directories and all their subdirectories
C:Documents and SettingsAll UsersApplication DataThermoRheoWin
C:Documents and SettingsAll UsersDocumentsThermoRheoWin.
Microsoft advices programmers to save application and user data in the above metnioned directories by default, but strange enough does not give Windows users with the default Users rights write access to these directories!

Thermo Scientific Port Devices Driver Download Windows 7

• Chromeleon™ 7.2 SR5 and up
• DECADE Elite, Lite and ROXY Exceed
• Official release May 2020

Chromeleon™ CDS is a fully featured data acquisition software from Thermo Fisher Scientific. The DECADE Elite/Exceed driver adds full instrument control for Electrochemical Detection (ECD) and Reactors (for EC/MS) up to 2 channels in a single time base. Supported is the DC mode with constant potential measurement for most applications, and the PULSE mode for special applications such as carbohydrates and aminoglycosides. A time table is supported for time based control of several operational parameters and triggers for external devices by switching relays. Also an external electric valve can be controlled via the Elite in case of special applications such as column switching during an analysis.

• Antec license bit set in ECD (firmware ≥ 1.09)
• Chromeleon 7.2 SR5 and up, license incl. class 3 device support

Thermo Scientific Port Devices Driver Download Windows 10

The driver has been developed with Chromeleon 7.2.9 – 7.2.10 and with DECADE Elite/Exceed firmware ≥ 1.09. It is functional for CDS versions 7.2 SR5 and up. A recent version Dialogue Elite software is required to be able to update the firmware and write the (paid) license code to the Elite. With new devices this code is factory set, in case of field upgrades the code is set by a special settings file. You should have a Chromeleon license with class 3 device support, consult your Thermo Scientific contact for details. Contact us for part number and prices.

Thermo Scientific Port Devices Driver Download 64-bit